Makita Blower Nozzle Extension Adapter / With Storage and Carrying Mount

This is a 12cm extension adapter for Makita blowers. (Extension adapter only, blower unit not included)
Allows you to blow away debris from the ground or floor while standing in a comfortable posture. By getting closer to the target, you can work more efficiently with less airflow, which also helps to extend battery life.
When not in use, the extension adapter can be stored and carried on the top of the blower using the storage/carrying mount. (When using the storage/carrying mount, the nozzle is extended by 2cm.)

While Makita also sells genuine extension nozzles, some users are concerned about the flex caused by the increased rubber parts and the added weight. This product does not extend as much as the genuine one, but it achieves the same effect with minimal weight increase, and can be stored, held, and carried on the blower unit at all times when nozzle extension is not needed.

Please try this extension adapter that allows you to easily switch the length of your blower nozzle according to your usage scene ?

[Compatible Models for Cordless Blowers]
UB185D (18V), UB144D (14.4V), UB100D (10.8V), UB002G (40Vmax)

[Compatible Models for AC100V Blowers]
UB1102, UB1103

[Please Note]
As this product is 3D printed, layer marks may be visible, but this does not affect its function or performance. To minimize weight increase, carbon fiber PETG is used with a slightly lower layer density. Please be careful of damage from strong impacts or drops. Avoid storing in high-temperature locations such as inside a car on a hot day, as this may cause deformation.

If you have any requests regarding nozzle extension length (longer/shorter) or layer density (prioritizing strength over weight), please let us know in the comments.